MasterTop 518 A binder for fast setting site mixed cementitious screed mortar – for fast track installation of cementitious screeds

How does MasterTop 518 work?

MasterTop 518 is a pre-bagged cementitious binder for site mixed screeds; the product is intended to be mixed with approved aggregates. MasterTop 518 is specially formulated to:

  • Improve workability of the mixed screed.
  • Maximise compaction of the laid screed.
  • Reduce shrinkage in the drying screed.
  • Ensure a rapid drying time of the screed
  • Provide a site mixed product of consistent performance.

What is MasterTop 518 used for?

MasterTop 518 ideal as a solution in the following areas:

  • For indoor and outdoor use
  • For areas which are exposed to permanent wetness.
  • For fast track bonded screeds and screeds installed on an isolating or insulating layer.
  • Suitable for heated screeds.
  • As repair mortar for concrete floors and cementitious screeds.
  • For layer thicknesses from 10 to 80 mm for continual layer of application.

What are the benefits of MasterTop 518?

MasterTop 518 offers the following advantages:

  • Can be tiled after approximately 3 days, already walkable after approx. 1 day.
  • On-site mixing of sand required.
  • Different mixing ratios possible.
  • Long working time, can be worked with and smoothed for almost 1 hour despite of short curing time.
  • Suitable for application by pump, even at higher temperatures.
  • Temperature resistant from -30°C to +80°C, therefore suitable for balconies, terraces, garages, industrial floor coverings cleaned with superheated steam.
  • Insensitive to moisture, therefore suitable for areas exposed to permanent wetness.

Product Information

Technical Data Sheet

Specification Clause

MasterFLow Anchor Software Grouts Master Builders Solutions BASF Construction Chemicals

MasterFlow Anchor Grouts Software

Download our MasterFlow Anchor Grouts Software


MasterTop 518_TDS

pdf (98,51 Kb)